Intermec PM4I - Adjusting the Printer

Chapter 3 — Configuring the Printer
PM4i Mid-Range Printer User’s Manual 83
2 In the address field, enter the IP address of your printer.
3 Press Enter. Your printer’s home page appears.
4 From the menu at the top of the page, click Maintenance. The
firmware upgrade screen appears.
5 Click Browse and browse to the location of the firmware upgrade
file.
6 Double-click the file, and then click Upgrade.
Downloading Fonts and Graphics
The PM4i supports 15 scalable Unicode TrueType and TrueDoc fonts
as standard. The Unicode standard allows the use of special characters
for various languages including non-Latin fonts, such as Arabic,
Cyrillic, Chinese (including enhanced Simplified Chinese GB18030),
Japanese, Korean, and Hebrew.
You can download additional fonts to the printer’s Flash memory
using:
• PrintSet. You can download PrintSet from the downloads page for
the PM4i on the Intermec website at www.intermec.com.
• Fingerprint or IPL commands. For help, see the Intermec
Fingerprint Command Reference Manual or the IPL Command
Reference Manual.
• a CompactFlash card or external 2GB USB mass storage device.