Intermec PM4I - Choosing an Ethernet or Wireless Network

Chapter 3 — Configuring the Printer
PM4i Mid-Range Printer User’s Manual 79
Through the Console, you can:
• drag-and-drop configuration bundles, OS updates, and firmware
upgrades to multiple computers.
• create a “golden” device configuration to use when updating other
computers.
• remotely change settings on SmartSystems-enabled computers
and peripherals.
With an AutoDeploy license, SmartSystems can automatically push
software, configuration settings, and other files to connected PM4i
printers. AutoDeploy can report on asset locations and battery status,
making it easier to manage your mobile devices. The license also
enables Scan-to-Connect, which makes connecting additional PM4i
printers to your secure wireless network as easy as reading bar codes.
You can download SmartSystems Foundation at no charge from the
Intermec website. For more information on SmartSystems, go to
www.intermec.com/SmartSystems. To purchase an AutoDeploy
license, contact your local Intermec sales representative.
Choosing an Ethernet or Wireless Network
If you have an 802.11 wireless radio option installed in your printer,
you need to choose between an Ethernet network or a wireless 802.11
network.
You can choose the network type of your printer:
• directly from the screen.
• using commands sent from your PC.
• using SmartSystems Foundation. For help, see the previous
section “Configuring Your Printer Using SmartSystems
Foundation.”
• from the printer home page. For help, see “Configuring the
Network Type” on page 73.
• using PrintSet. For help, see “Configuring Your Printer With
PrintSet” on page 77.