Intermec PM4I - Page 50

Chapter 1 — Using the Printer
36 PM4i Mid-Range Printer User’s Manual
10 Turn the printhead lift knob counterclockwise to engage the
printhead.
11 Close the front door and media cover.
12 Set the Paper Type to Thermal Transfer Ribbon (TTR).
a On your printer’s keypad, press T to enter the Setup menu.
b If you are using Fingerprint, go to Media > Paper Type >
Transfer.
If you are using IPL, go to Media > Paper Type > TTR.
c Press E.
d Press T to exit the Setup menu.
Printhead
lift lever
Printhead