Invacare Comet - T Arm Width Adjustment; T Arm Pad Depth Adjustment

25
A
R
M
S
PROCEDURE 2ARMS
A
R
M
S
"T" ARM PAD DEPTH ADJUSTMENT
(FIGURE 8)
1. Remove the two (2) phillips screws that secure
the arm pad to the arm tube.
2. Remove the two (2) allen screws that secure
the arm tube to the armrest assembly.
3. Reposition the arm tube to one (1) of four (4)
positions depending on the desired arm pad
depth.
NOTE: Two (2) of the four positions are obtain-
able by rotating the arm tube 180
o
.
4. Resecure the arm tube to the armrest assem-
bly with the two (2) allen screws.
5. Reattach the arm pad to the arm tube with the
two (2) phillips screws.
6. Repeat for the opposite side, if necessary.
Phillips
Screw
Allen
Screws
Arm Pad
Armrest
Assembly
Arm Tube
NOTE: If
necessary,
rotate arm
tube 180
o
to
obtain two (2)
positions.
Phillips
Screw
FIGURE 8 - "T" ARM PAD DEPTH ADJUSTMENT
"T" ARM WIDTH ADJUSTMENT (FIGURE 7)
1. Remove the two (2) phillips screws that secure
the arm pad to the arm tube.
2. Turn the arm pad around and reposition the arm
pad on the arm tube.
3. Resecure the arm pad to the arm tube with the
two (2) phillips screws.
4. Repeat for the opposite side, if necessary.
FIGURE 6 - "T" ARM
INSTALLATION/HEIGHT ADJUSTMENT
HEIGHT
ADJUSTMENT
Coved
Washers
Locknuts
Skirt Guard
Clamp
Towards Front
of Wheelchair
Wide End of
Skirt Guard
(Towards Rear
of Wheelchair)
Allen
Screw
Arm Socket
Mounting Bolts
Coved
Washers
Wheelchair
Frame
FIGURE 7 - "T" ARM WIDTH ADJUSTMENT
Phillips
Screw
Arm Pad
WIDTH
ADJUSTMENT
Phillips
Screw
Arm Tube
HEIGHT
ADJUSTMENT
Height
Adjustment
Holes
Arm Post