Invacare Comet - Page 4

4
PROCEDURE 9 - CONVERTING ..................... 69
CONVERTING FROM THE STANDARD
POSITION TO THE REVERSED
POSITION OR VICE VERSA
NON-MINI TILT............................................ 69
CONVERTING FROM THE STANDARD
POSITION TO THE REVERSED POSI-
TION OR VICE VERSA MINI-TILT.............. 71
PROCEDURE 10 - MINI TILT ........................... 73
ENGAGING THE MINI TILT............................ 73
ADJUSTING THE LOCK CYLINDER
CABLES ...................................................... 73
REPOSITIONING THE RELEASE
HANDLE...................................................... 73
LIMITED WARRANTY ...................................... 75
PROCEDURE 8 - SEAT-TO-FLOOR ............... 55
CHANGING SEAT-TO-FLOOR HEIGHT .......... 55
LARGE WHEEL, CASTER SIZE, AXLE
PLATE POSITION, AND CASTER FORK
FOR 10-3/4 INCH, SEAT-TO-FLOOR
HEIGHT-SHORT FRAME ........................... 56
LARGE WHEEL, CASTER SIZE, AXLE
PLATE POSITION, AND CASTER FORK
FOR 11-3/4 INCH, SEAT-TO-FLOOR
HEIGHT-SHORT FRAME ........................... 56
LARGE WHEEL, CASTER SIZE, AXLE
PLATE POSITION, AND CASTER FORK
FOR 12-3/4 INCH, SEAT-TO-FLOOR
HEIGHT-SHORT FRAME ........................... 58
LARGE WHEEL, CASTER SIZE, AXLE
PLATE POSITION, AND CASTER FORK
FOR 13-3/4 INCH, SEAT-TO-FLOOR
HEIGHT-SHORT FRAME ........................... 59
LARGE WHEEL, CASTER SIZE, AXLE
PLATE POSITION, CASTER FORK,
AND HEADTUBE POSITION FOR
13-3/4 INCH, SEAT-TO-FLOOR
HEIGHT-LONG FRAME.............................. 60
LARGE WHEEL, CASTER SIZE, AXLE
PLATE POSITION, CASTER FORK,
AND HEADTUBE POSITION FOR
14-1/2 INCH, SEAT-TO-FLOOR
HEIGHT-LONG FRAME.............................. 61
LARGE WHEEL, CASTER SIZE, AXLE
PLATE POSITION, CASTER FORK,
AND HEADTUBE POSITION FOR
15-1/2 INCH SEAT-TO-FLOOR
HEIGHT-LONG FRAME.............................. 62
LARGE WHEEL, CASTER SIZE, AXLE
PLATE POSITION, CASTER FORK,
AND HEADTUBE POSITION FOR
16-1/2 INCH SEAT-TO-FLOOR
HEIGHT-LONG FRAME.............................. 65
LARGE WHEEL, CASTER SIZE, AXLE
PLATE POSITION, CASTER FORK,
AND HEADTUBE POSITION FOR
17-1/2 INCH SEAT-TO-FLOOR
HEIGHT-LONG FRAME.............................. 67
TABLE OF CONTENTS (CONTINUED)
TABLE OF CONTENTS
T
A
B
L
E
O
F
C
O
N
T
E
N
T
S