Version 1.02 | Fieldbus Guide | 21www.invertekdrives.com
7
Internal Webserver
7
Internal Webserver
7.4.2. Manually Assigned IP Address
To manually set up the module IP address, please select Fixed mode in the Configuration Method, type new values in required
fields in column New Value as shown below and confirm changes by clicking APPLY NEW VALUES.
NOTE A power cycle is necessary after changing the network settings. Please click REBOOT button at the top left corner or power
cycle the module!
7.5. Creating an Additional User Account for Limited Access
It is possible to change admin password and create second User with its own login, password, permissions, and limited access if
required. To create new user, you need to add new login details (login and password) and defined the access levels (permissions) for
this user.
User with permissions like above, will have a limited access to the module data and settings as shown below.
NOTE Default user account is still valid in addition to the second user account!
7.5. Creating an Additional User Account for Limited Access
It is possible to change admin password and create second User with its own login, password, permissions, and limited access if
required. To create new user, you need to add new login details (login and password) and defined the access levels (permissions) for
User with permissions like above, will have a limited access to the module data and settings as shown below.
To Next Page
Loading...
Need help?
General
