EasyManua.ls Logo

Invertek Drives Optidrive E3 ODE-3 Series - Page 44

Invertek Drives Optidrive E3 ODE-3 Series
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44 | Fieldbus Guide | Version 1.02 www.invertekdrives.com
8
Ethernet/IP Communication
Network Status (NS) Indicator
State Ethernet/IP
Steady Off Not powered
No IP address
Steady Green Online
One or more connections active or message received
Flashing Green
Online
No connections active or no messages received
Flashing Red Connection timeout
Steady Red Duplicate IP
Flashing Green and Red Self-test
Module Status (MS) Indicator
State Indication
Steady Off No power
Steady Green Operating in normal condition
Flashing Green Drive not configured
Flashing Red Minor fault - Recoverable fault
Steady Red Major fault - Unrecoverable fault
Flashing Green / Red Self-test
COMM
State Indication
Steady Off Modbus protocol TX/RX inactive
Steady/flashing Yellow Modbus protocol TX/RX active
ERROR
State Indication
Steady Off Modbus protocol TX/RX Status OK
Steady Red Non-recoverable internal fault Modbus communications circuit fault
Flashing Red Recoverable Communication fault or configuration error
Link Activity LEDs (P1/P2)
State State Indication
P1 Speed Steady Yellow 100Mbps link active
Steady Off 10Mbps or No link
P1 Link Activity Steady Green Valid Link
Steady Off No Link
Flash TX/RX
P2 Speed Steady Yellow 100Mbps link active
Steady Off 10Mbps or No link
P2 Link Activity Steady Green Valid Link
Steady Off No Link
Flash TX/RX
State
Indication
Steady Off
No power
Steady Green
Operating in normal condition
Flashing Green
Drive not configured
Flashing Red
Minor fault - Recoverable fault
Steady Red
Major fault - Unrecoverable fault
Flashing Green / Red Self-test
Flashing Green / Red Self-test
COMM
State
Indication
Steady Off
Modbus protocol TX/RX inactive
Steady/flashing Yellow Modbus protocol TX/RX active
Steady/flashing Yellow Modbus protocol TX/RX active
ERROR
State
Indication
Steady Off
Modbus protocol TX/RX Status OK
Steady Red
Non-recoverable internal fault Modbus communications circuit fault
Flashing Red
Recoverable Communication fault or configuration error
Link Activity LEDs (P1/P2)
State
State
Indication
P1 Speed
Steady Yellow
100Mbps link active
Steady Off
10Mbps or No link
P1 Link Activity
Steady Green
Valid Link
Steady Off
No Link

Table of Contents

Related product manuals