INVT DA180-S4R5SG0

DA180 series basic AC servo drive Overview
-5-
DA180 series servo drive (100W–1kW)
Specification
Description
4: Torque limit signal
Protection
For hardware
Such as protection against overvoltage, undervoltage,
overcurrent, overspeed, overload, overheating, encoder
fault, and power outage detection.
For software
Such as protection against ROM fault, initialization fault, I/O
distribution exception, and excessive position deviation.
Fault recording
1: Ten faults can be recorded.
2: Key parameters can be recorded when a fault occurs.
Environment
Working temperature
0–45°C
Storage temperature
-20–80°C (no frozen)
Working/storage humidity
≤90%RH (no condensation)
IP rating
IP20
Altitude
Below 1000m
Vibration
≤5.88m/s
2
, 10–60Hz (not allowing work at the resonance
point)