INVT DA180-S4R5SG0

DA180 series basic AC servo drive Installation instructions
-17-
2.2.2 Installation directions and clearances
Install the servo drive vertically and keep enough space for good ventilation. If necessary, install a fan
to ensure the temperature inside the control cabinet is lower than 45°C.
Installing one drive
> 100mm
> 40mm
> 20mm > 20mm
> 100mm
Upper
Lower
Installing multiple drives
>
20mm
Lower
>
100mm
>
40mm
>
20mm
>
20mm
> 100mm
>
40mm
Upper