INVT DA180-S4R5SG0

DA180 series basic AC servo drive Overview
-9-
No.
Description
Example
③
Inertial
classification
L: Small inertia
M: Medium inertia
H: Large inertia
④
Base model no.
06: 60mm
08: 80mm
13: 130mm
⑤
Rated power
0R2: 200W
0R4: 400W
0R7: 750W
1R0: 1.0kW
⑥
Rated revolutions
per minute
(RPM)
A: 1000rpm
(2)
B: 1500rpm
E: 2000rpm
F: 2500rpm
G: 3000rpm
⑦
Voltage class
2: 220VAC
⑧
Encoder type
9: 23-bit multiturn absolute
S: 17-bit single-turn absolute
(1)
⑨
Shaft end
connection
A: Solid with threaded hole and key (standard)
B: Solid optical axis
(1)
⑩
Optional part
0: With oil seal but no brake
1: Without oil seal or brake
(1)
2: With oil seal and permanent magnet brake
3: Without oil seal but with permanent magnet
brake
(1)
4: With oil seal and electromagnetic brake
(2)
5: Without oil seal but with electromagnetic brake
⑪
Lot no.
Manufacturer lot number
(3)
Remarks:
(1)
: For a model without standing inventory, the lead time is longer than usual.
(2)
: When an electromagnetic brake motor is used, since the electromagnetic brake will have
backlash, there will be a small clearance (less than  0.5°) in the rotating direction if the motor
brake is closed. Pay attention to this in vertical shaft application scenarios. There is no clearance
when a permanent magnetic brake is used.
(3)
: Leave it empty for the first-time model selection.