DA180 series basic AC servo drive Control modes
-44-
Enabling terminal jogging
If this digital input is valid, terminal jogging is valid.
Gantry synchronization
cancellation input
If this digital input is valid, gantry synchronization is cancelled.
Master gantry synchronization
alignment sensor
Signal used by the master gantry synchronization alignment sensor.
Slave gantry synchronization
alignment sensor
Signal is used by the slave gantry synchronization alignment sensor.
Dynamic brake relay feedback
If this digital input is valid, the dynamic brake relay is closed.
Auto/manually switching turrets
If this digital input is valid, the turret runs in manual mode.
If this digital input is valid, the turret jogs forward.
To Next Page
Loading...
