o Continuously recording mode
Record Alarms – Allow the recorder to record the triggered alarms in the
system as well as the video file. Alarms will be recorded in a separate
track in the ASF file.
x Connection with the server is lost – Triggered when the
connection with the VMS / Server is lost
x On demand – Triggered when a user sends a Start or Stop
recording command via the ION API.
x On motion event – Triggered when motion is detected
x Custom alarm – Triggered when a user sends a custom alarm
command via the ION API.
o Record On Alarm mode
Alarm Configuration
x Connection with the server is lost – Starts recording when a
connection loss has been detected with the NVR
x On demand – Starts / Stops recording when an ION API request
has been received. The Live Viewer can also be used to triggered
To Next Page
Loading...
