2.3 Usage ipEther232.Telnet
The RS232/485-Ethernet-Converter, ipEther232.Telnet makes it possible to control devices with
RS232/485 in rfaces via TCP/IP (Ethernet).
From several workstations to the network all attached devices can be used. There are two
supported mo
Mode 1: Tel
te
des supported by this device: telnet and gateway.
net
ices!
The Telnet-connection gives you high measurey of flexibility and the control about
the Ethernet connected serial Devices and beyond that it’s a Operating system-independently.
No drivers are needed because nearly every operating system has telnet pre-installed.
Mode 2: Ga ay
et to serial Dev
Telnet from Ethern
tew
Gateway from serial Devices / Data to Ethernet!
The Gateway functionality gives you the possibility for direct data transfer to a TCP/IP Address
(IP-Address:Port).
For example an application can log, filter, analyze, format and represent serial Data
in the Internet / Intranet.
To Next Page
Loading...