If you create a Telnet Connection to the standard port 23(data port) and open a
Hyper Terminal (Baudrate=115200, Databits=8, Parity=none, Stoppbits=1,
flowcontrol=Hardware) you can only send data from the telnet window to the
Hyper Terminal, because the RTS and DTR-Signal are not set it.
After the Com-Interface is opened type “modemstatus=12” on the command
window for activate the RTS- and DTR-Signale.
5.6 The Datencommunication (Gateway - Modus)
Is set the parameter “remoteip” than will automatically close the
telnetprogram on the standard port (port 23)
Änderungen vorbehalten Stand 09.09.05
ipcas GmbH ipEther232 V11.01 Seite 50 von 150
To Next Page
Loading...