IpCAS ipEther232 - Device Services

Error when reading the digital parameters out of the MySQL database
62 ERR_DALOG_DB_WRITE_DIGITAL
Error when writing the digital parameters into the MySQL database
3 ERR_DALOG_DB_READ_ANALOG
Error when reading the analog parameters out of the MySQL database
MySQL Client connected to the Server
R_CAN2DB_SHUTDOWN_CTRL_C
Shutdown with ‘Ctrl+C’
2 ERR_CAN2DB_EVENTS_TABLE_CORRUPT
MySQL events Table is corrupted
RRUPT
MySQL messages Table is corrupted
SE_CONNECTION
On TelNet Connection is closed
3.4 Services
With the installation of the configtool there is also the Service „ipEther Device
Messages logging“ is installed, wich allowes to do a fault-tracing after several
days. In addition the Driver-Service for the virtuel COM-Interface is installed.
The service „ipEther Device Messages logging“ writes all Device Messages from
the configtool into the Windows Event-Display, wich can be found with right
mouse click on "my Computer" -> manage -> Event-Display -> Application. An
event can be announced by double-click as follows.
6
64 ERR_DALOG_DB_WRITE_ANALOG
Error when writing the analog parameters into the MySQL database
65 ERR_CAN2DB_CAN_STOP
CAN Driver finished with Error
66 ERR_CAN2DB_CAN_INIT_STOP
CAN Driver-Init finished with Error
67 ERR_CAN2DB_MYSQL_QUERY
MySQL Client – Query failed
8 ERR_CAN2DB_MYSQL_CONNECT 6
70 ER
71 ERR_CAN2DB_CONFIG_TABLE_CORRUPT
MySQL config Table is corrupted
7
73 ERR_CAN2DB_MESSAGES_TABLE_CO
74 ERR_CAN2DB_CONFIGANALOG_TABLE_CORRUPT
MySQL configAnalog Table is corrupted
85 ERR_INVALID_SOCKET
Socket is not available
86 ERR_CLO
Änderungen vorbehalten Stand 09.09.05
ipcas GmbH ipEther232 V11.01 Seite 28 von 150