9.7 OPC-Se
rocess Control“.It is a standard Software-Interface that
ange data for applications from different producer
different
using different drivers. Thus it is possible to use
ou can take hold with MS-Office on your
or the OPC server the installation path is "C:\Programme\ipcas GmbH\ipcas
ipEther IOBox OPCServer\....." (optional of to install the set-up CD)
The file „IOBoxConfigs.xml“ ist the configurationsfile. youc can edit the file
with a simple „Editor. In this file you have to type all ipEther232.IO
should work with the OPC-Serve ogethe
rver
OPC means „OLE for P
should make possible to exch
With the help of this technology you can exchange Data between
Automatisationsystems without
different visualisationssystems or y
process data.
F
which
r t r.
The following parameters are available
.109.223.227" IP-Adresse
Name="Device No. 1" comment for the device
Password="" valid password
SampleRate="10" sample rate
Debounce="1" debounce rate
TransmitRate="500" transmit rate
IPAddress="192
Änderungen vorbehalten Stand 09.09.05
ipcas GmbH ipEther232 V11.01 Seite 125 von 150
To Next Page
Loading...