8.2 SNTP-Clients
NTPTime
To synchronize the time of your computer with the time of the NTP server you`ll
need a SNTP client.
NTPTime is easy and free you find it on this link
http://www.tu-braunschweig.de/afs/tu-bs.de/public/ntp_win/ntp41bin.zip and yo
find a detailed en
u
glisch documentation on this link
http://www.tu-braunschweig.de/afs/tu-bs.de/public/ntp_win/ntp41doc.zip
Installation under Windows systems
1. create a temp directory(e.g. C:\temp\ntp\bin).
2. copy(.../public/ntp_win/) ntp41bin.zip to C:\temp\ntp\bin
. From the bin-Directory copy ntptime.cpl to the SysRoo
and extract it.
t-Directory (e.g.
C:\winnt\system32).If you have do the last steps right, in the control panel
n here
3
you will see a new NTP icon that looks like this sig
. On the
control panel is this icon for controlling the NTP Settings.
ime.exe to C:\Programm\NTP from bin directory.
trol panel start the NTP-Controller and make your individual
s like Timeserver-Adresse, logfile directory or how often should the
sed.
. Open a Command Shell and type the following commands:
C:\Programme\
Change the directory with ntptime.exe
stall implement the ntptime als Windows Dienst
net start ntptime start the ntptime-service
4. Copy ntpt
5. In the con
Setting
device synchrosi
6
.\ntptime –in
Im von Ihnen konfigurierten Ordner entstehen die Log-Dateien, die per
Texteditor kontrolliert werden können. The logfiles will create on your
choosen folder. You can control the logfiles with Notepad.
If it is said to only the time server NTPTime synchronizes at every start of the
computer and finishes the service after this.
Here you can type
the SNTP-Server-
Adresse
After this click on
the add button to
add the Server to
the list.
Änderungen vorbehalten Stand 09.09.05
ipcas GmbH ipEther232 V11.01 Seite 101 von 150
To Next Page
Loading...