IpCAS ipEther232 - General Technical Details; Technical Data

Ch
0.1 Technical Data
Constructional execution
Housing
Dimensions
Weight:
Desktop
DIN-Rail-Unit
External power supply
Plastic
see Dimensions
Approx. 150 g
Approx. 180 g
Approx. 180 g
Supply voltage
Desktop
DIN-Rail-Unit -H24
DIN-Rail-Unit -H60
Capacity
Desktop
DIN-Rail-Unit -H24
DIN-Rail-Unit -H60
External power supply 1
Alternating voltage
Direct voltage
Operating temperature
Relative humidity
External power supply 2
AC-voltage
DC-voltage
Operating temperature
Relative humidity
Protection class
Galvanische Trennung
(AC – Versions on request)
9 V DC (8 – 14 V DC ± 5 %)
24 V DC (18 – 36 V DC ± 5 %)
60 V DC (18 – 72 V DC ± 5 %)
Rated voltage (typical value)
9 V DC 80 mA ca. 0,8 W
24 V DC 60 mA ca. 1,44 W
60 V DC 40 mA ca. 2,4 W
230 V AC 50 Hz approx. 6,3 VA
9 V DC approx. 2,25 VA
0°C to +40°C
5 % to 90 % non condensing
100 / 240 V AC 50 / 60 Hz approx. 12,6 VA
9 V DC approx. 8,1 VA
0°C to +40°C
5 % to 90 % non condensing
II / III (Protection insulation, Protection seperation)
1,5 KV
Thermal shock tests
Recommended operating temperature
Limit temperature while operating
Store- and Transporttemperature
Relativ humidity
+10°C to +50°C
+5°C to +55°C
-10°C to +70°C
5 % to 90 % non condensing
Serial Interface
Socket
Pin allocation
Options
Baud rate
Parity
Databits
Stopbits
Kabel length in the office
At RS485
9-pin Sub-D connector full RS232
see Pin allocation
2400 to 115200 Baud
None, Even, Odd, Mark, Space
7 or 8 Bits (Exception 7N1)
1 or 2 Bits
RS232 up to 10 m
RS485 up to 500m
2 / 4 wire solution
Transmitsignals optionally insterable (RTS or CTS)
Ethernet Interface
Socket
TCP/IP
10BaseT
RJ45
UDP Port 3497, ICMP, ARP
Display Power, System, Error, Link,
EthRxD, EthTxd
Rs232 RxD, TxD
Firmware
Driver
Setup & Configurationstool
for Windows NT4 / 2000 / XP
.Net Framework 1.1
Standards EN 55022/1998
EN 50082-2/1997
apter 10: General technical details
1
Änderungen vorbehalten Stand 09.09.05
ipcas GmbH ipEther232 V11.01 Seite 130 von 150