Chapter 7: Configuration of ipEther232.PPP
7.1 Configuration of ipEther232.PPP
As mentioned above, the configuration program recognizes all devices in its own
network segment.
A double click on an entry opens the details dialog which contains five parts.
TCP/IP (Ethernet):
his is where you can find or set the device name (Set Name) the MAC-Address
nd IP-Address.
ere you can configure the default Gateway and the Subnet Mask for the
thernet side.
(Default Gateway or no Gateway = 0.0.0.0)
fault Subnet Mask: 255.255.255.0)
T
a
H
E
(De
Änderungen vorbehalten Stand 09.09.05
ipcas GmbH ipEther232 V11.01 Seite 81 von 150
To Next Page
Loading...