RS232:
Baudrate and Handshake are adapted to the communication behavior of the
erial terminal device.
Modem settings (use Modem):
The modem behavior is defined here.
„Init Dialstring“: Typically the Hayes commands are used in the „init string“ for
communicating with the modem. Please refer to the modem user guide for these
commands.
„Total Timeout“: Specifies the maximum time span after which the modem
connection is cut. The default 0 disables this function.
„Idle Timeout“: Specifies the time in minutes after which the modem disconnects.
s
Änderungen vorbehalten Stand 09.09.05
ipcas GmbH ipEther232 V11.01 Seite 82 von 150
To Next Page
Loading...