IpCAS ipEther232 - PPP IP Address Settings

-Adress (PPP):
ive Client this IP“: This is where you can set the IP address for the serial side.
PP Parameter negation:
„MRU-Size" specifies the maximum IP packet size. (Default = 1500)
"ACCM". The entry format is hexadecimal code. (Default = 0)
„Protocol field Compress”: Default: “Off”
„Address Control field Compress”: Default: “Off”
„Magic“: Default: “On”
The above parameters are described in more detail in the RFC-1661 and
RFC-1662.
IP
„Take IP from Server“: This is where you can specify that the IP-Adress comes
om a server. fr
„G
P
Änderungen vorbehalten Stand 09.09.05
ipcas GmbH ipEther232 V11.01 Seite 83 von 150