IpCAS ipEther232 - Sample Telnet Interface Code

5.7 Sample der ipEther232.Telnet Schnittstelle
Sample CommandChannel ()
{
Socket Cmd = OpenClientSocket (IP, 3497);
Cmd.Send(“mode 9600,8,n,1”);
Cmd.Send(“tc57 1.2,2”);
Cmd.Send(“rxdtimeout 100”);
……………………….
Cmd.Send(“chartimeout 10”);
Cmd.Close();
}
Sample GetParameters ()
{
Socket Cmd = OpenClientSocket (IP, 3497);
Cmd.Send(“?”);
Parameters = Cmd.Receive();
Print(Parameters); // print values of all parameters.
Cmd.Close();
}
I). Telnet Client:
Sample Read / Receive
{
Socket Data = OpenClientSocket (IP, 23);
Data.Send(“this will be send via RS232 line”);
Änderungen vorbehalten Stand 09.09.05
ipcas GmbH ipEther232 V11.01 Seite 51 von 150