IpCAS ipEther232 - IO Commands; RS232 Commands

O Commands (Port 3497)I
Command default Answer Description
“SampleRate [10]
ate in milliseconds.
(1…255 ms)
” “SampleRate ”value
Set the sample r
“TransmitRate [20
…65535 ms)
00]” “TransmitRate value”
Set the Transmit rate.
0 = no cyclic Transmission.
(0=off ; 50
“Debounce [3]” “Debounce value
Number of stable samples before
accept the Pin. (1…15)
”
“OnChange [1]” “OnChange valu
Transmit if any Changes. But no closer
than 100 ms. (0=off ; 1=on)
e”
“RC counter value” “RC coun
Resets the Counter n to the given
value.
(Counter 0…5 ; Value 0…0xffffffff)
ter value”
“Counter [1]” “Counter val
Transmit the Counter [on|off]
(0=off ; 1=on)
ue”
“Events [1]” “Events val
Transmit the Events [on|off]
(0=off ; 1=on)
ue”
[ ... ] optional Arguments
( … ) Value / Range
RS232 Commands (Port 3497)
Command default Answer De ption scri
“mode” “mod
the current UART Mode
e 9600,8,n,1”
Get
“mode [9600,8,n,1]”
“ok” s the UART M or “error” Set ode
“faf [1]” “faf v
AndForget (0 ; 1=on)
is mode if off Server has to
acknowledge the recipience of the Data
alue”
Fire =off
, theIf th
“RXRate [300]” “rxrate value”
Number of ms before transmitting the
received Data. (50...65535 ms)
“CharTimeout [0]” “chartimeout value”
Number of ms with no received bytes
before transmitting the Data to the
Ethernet (Gap detection)
(0=off ; 5…255 ms)
[ ... ] optional Argume
nge
Mode: B
nts
( … ) Value / Ra
audrate,DataBits,Parity,StopBits
Baudrate: 2 115200
DataBits: 7
Parity: n
S 0
400, 4800, 9600, 19200, 38400, 57600,
, 8
, e, o, 1, 0 (= None, Even, Odd, Mark, Space)
, 1, 2 topBits:
Änderungen vorbehalten Stand 09.09.05
ipcas GmbH ipEther232 V11.01 Seite 113 von 150