Traceroute
Over traceroute you can see the data path between two servers in the internet.
Traceroute lists all servers, which are between the respective traceroute-server
and the destination adress.
Ping
Ping is an application of the ICMP (Internet Control Message Protocol RFC 792).
This protocol (also a component of the IP protocol) transfers different
administrative information and can therefor also be used for fault-tracing. If the
ping signal meets an object, it’s reflection (echo) that can be received from the
appropriate transmitter again. So ping can find out whether the IP address is
active (if a connection could be established) and how fast it is.
Änderungen vorbehalten Stand 09.09.05
ipcas GmbH ipEther232 V11.01 Seite 37 von 150
To Next Page
Loading...