/ Multicast
ivate the Multicast and set the Multicast address.
he Multicast mode requires that the server and the clients have multicast at their
DP-Port U
Here you can configure the UDP-Port. (Default = 123)
Broadcast / Multicast Interval
adcastHere you can configure the Broadcast / Multicast interval. Bro
interval is the time period in which the NTP server transmits the alignment
information to all clients. Clients and server must be in the same Subnet.
Multicast
ere you can deactivate or actH
T
disposal and configured
Änderungen vorbehalten Stand 09.09.05
ipcas GmbH ipEther232 V11.01 Seite 98 von 150
To Next Page
Loading...