9. Demonstration Programs and Gifts
The IRIS workstation is shipped with a set of demonstration programs,
programming examples, and other miscellaneous tools. This chapter tells how
to operate the demonstration programs. The demonstration programs that run
under the window manager are described in detail in Section 9.1.3.
9.1 Demonstration Programs
Demonstration programs can be run any time after the system is booted. They
are located in the directories /usr/people/demos and /usr/people/mexdemos. The
directory mexdemos contains demonstration programs that run with the window
manager, while the programs in demos do not work correctly if the window
manager is running .
9.1.1 Running Demonstration Programs
1. Boot the workstation in multi-user mode.
2. Log in to the workstation as demos or mexdemos.
IRIS login: demos
IRIS login: mexdemos
3. If you are running the window manager demonstration programs
(mexdemos), run startup:
startup
The textport is labeled with a banner, which indicates it is the
console window.
4. Display a listing of the available programs with the ls command:
ls
Version 1.1 SERIES 3000
To Next Page
Loading...
General