5. When the terminal prompts for the correct date, enter the date in
the requested format, as illustrated in the example below. The
characters mmddhhmmyy.ss represent digits for month-day-hour-
minute-year-seconds. The year and the seconds are optional.
Is the date Wed July 21 08:10:33 PST 1989 correct? (y or n) n
Enter the correct date (mmddhhmm[yy][.ss]):0721083089.33
6. After the startup sequence is complete, the IRIS 3010 automatically
runs the terminal emulator program, wsiris. Enter the sequence ~! to
the first prompt to enter the shell:
XNS or IEEE-488 option:
Connect to what host? ~!
TCP/IP option:
Enter IRIS IP address : ~!
If your IRIS has the IBM option, enter ~! to return from the t3279
menu to the shell.
The shell prompt appears:
%
7. To use the flight simulator, type:
~demos/flight
8. To leave the flight program, press the
ESC
key.
To return to the terminal emulator program, enter the exit command.
See Chapter 5 for more information on using the terminal emulator, connecting
to a host, and configuring the user environment.
3.3 The Startup Environment
During the startup process, the IRIS displays a set of system information,
including memory size, hardware configuration, and file system identification
(see Figure 3-2).
Version 1.1 SERIES 3000
IRIS OWNER’S GUIDE 3-5 Booting the IRIS
To Next Page
Loading...
General