Version 1.0 SERIES 3000
Appendix A: IRIS Specications
The standard configuration for IRIS series 3000 systems includes these
components:
•Electronicscabinetwithonediskdrive
•Fifteen-inchornineteen-inchtilt-and-swivel60Hznon-interlacedmonitor
•Keyboardwithright-handandleft-handconnectorsforthemouse
•Opticalmousewithgridpad
•Ethernettransceiver
The size specifications for each of these components is listed in Table A-1.
IRIS series 3000 systems can also be ordered with these hardware options:
•Dialandbuttonbox
•Nineteen-inch33Hzinterlacedmonitor
•Digitizertablet
•Tektronix4692printer
•Half-inchtapedrive
•Quarter-inchcartridgetapedrive
•Stereoopticviewercable
•Floppydisk(standardonIRISterminal)
Early IRIS series 2000 models with the Turbo upgrade may not have the same
standard peripherals described here. The 60 Hz monitor may be different from
the one described in this guide. The mouse may be mechanical rather than
optical. The early IRIS 2400 Turbo system required a separate junction box.
For a description of these features, see the IRIS Workstation Guide Series 2000,
Version 1.0.
See Chapter 7 for more information on optional peripherals.
To Next Page
Loading...
General