4-10 IRIS OWNER’S GUIDE
SERIES 3000 Version 1.0
Workstation Administration
1. Standard heading for time zone
2. Offset from Greenwich Mean Time (in hours)
3. Optional daylight savings time zone
The IRIS workstation is shipped with the time zone
set for Pacific Standard Time:
PST8PDT
These are examples for other time zones:
EST5EDT
CST6CDT
MST7MDT
For more information, see TZ(4).
/usr/lib/crontab This file contains entries for commands to be run at
fixed intervals by the cron daemon (the clock
daemon). See cron(1M).
/usr/lib/acct/holidays This file contains a list of holidays. It is used by the
calendar(1) program.
/usr/lib/Mail.rc This file contains set commands used for initializing
the mail system.
The next four files configure the Un i x -to-Un i x communication system UUCP.
Further information on UUCP can be found in the Un i x Programmer’s Manual,
Volume II.
/usr/lib/uucp/L-devices This file sets the line speeds for the ports used by
uucp(1C). The file contains a series of one-line
entries that follow the format of this example:
DIR tty06 0 4800
This entry specifies that the device /dev/tty06 is a
directly connected computer that can be used at
4800 baud.
/usr/lib/uucp/L-dialcodes This file contains the dial-code abbreviations used in
the /usr/lib/uucp/L.sys file. The entries are in the
form:
abb dial-sequence
To Next Page
Loading...
General