EasyManuals Logo

ISHIDA UNI-7 User Manual

ISHIDA UNI-7
309 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
PRECAUTIONS FOR SAFE USE
PRECAUTIONS FOR SAFE USE
It is strongly advised that the following safety measures must be observed to ensure the safe
operation of the machine.
Prepare a dedicated power source and always use a
power supply with rated voltage. Never connect the
machine power input with an AC power supply
exceeding the rated voltage. To avoid any potential
electrical shock, ensure that the protective ground
wire is connected to the main grounding provision.
A power supply that generates voltage variation may
cause a malfunction, or using the machine outside of the
rated voltage may result in machine failure or danger
such as electric shock.
Do not install the machine near a TV set or radio.
Doing so may cause static to the TV set and/or radio as
this machine emits week electric wave.
Do not allow water or any liquids to come into
contact with the machine.
Doing so may result in fire or cause the machine to break
down.
Do not drop or apply a strong shock to the machine.
Doing so may cause the machine to break down.
Do not disassemble, modify, or attempt to repair the
machine.
Doing so may damage the original safety functions.
Do not hold the connector cover when carrying the
machine.
Dropping the machine may result in injury or cause the
machine to break down.
ii UNI-7 User’s Manual

Table of Contents

Other manuals for ISHIDA UNI-7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ISHIDA UNI-7 and is the answer not in the manual?

ISHIDA UNI-7 Specifications

General IconGeneral
Use conditionsTemperature: -5 to 35°C Humidity: 30 to 85%, Non condensing.
Power supply:AC100 – 240V, 50 / 60Hz
Power consumption1.0A/0.5A
Weighing capacity Scale interval15 kg: 0 to 6/0.002 kg, 6 to 15/0.005 kg 30 lb: 0 to 15/0.005 lb, 15 to 30/0.01 lb
Weighting accuracy1/3000
Printing methodDirect thermal method
Printing speed100mm/second, 120mm/second Note: The printing speed may vary according to label conditions.
Printing effective size56mm
Label sizeLabel width: 30mm to 60mm Label length: 20mm to 150mm
Operator/Customer display7.0 inch color liquid crystal with back light, 480 X 234dots
Thermal head2 inches (448dots) and 8 dots/mm
Number of label cassettes7 cassettes
Program store mediumFlash ROM (32M bytes)
Input/OutputLAN 1 channel USB 1 channel CF 1 channel Drawer 2 channels

Related product manuals