Isoprime 100 - Inserting and Deleting Samples

IsoPrime User’s Guide
Version 1.01 IsoPrime100 User’s Guide Page 63 of 219
 The new samples are added to the end of the sample list. Any information in the last row
of the sample list is duplicated into the new rows. The sample name and bottle number
fields are automatically incremented.
INSERTING SAMPLES
Insert new sample rows into the sample list as follows:
 Move the cursor to the row directly below the position in the sample list where
the new row is required. Only one cell in the row needs to be selected.
 To insert the new row, either press the insert sample toolbar button or press the
Insert keyboard key, or right-click in the sample list and choose Insert from the drop
down menu.
A new row is added above the currently selected row. Any information in the row above the
current row is duplicated and the sample name and bottle number fields are automatically
incremented. The cursor is moved to the new row.
If multiple rows are selected, selecting Insert will result in the addition of the same number of
new rows as the number of presently selected rows, and any information in the selected rows
will be duplicated.
DELETING SAMPLES
Delete single or multiple sample rows as follows:
 Click on the numbered cell(s) on the left hand edge of the sample list to select
the row(s) to be deleted.
 Either press the delete sample button or right-click in the sample list and choose
Delete from the drop down menu.
Note that it is not possible to delete all of the rows in the sample list. If all the rows are
highlighted and the delete sample button is then pressed, the sample rows are only cleared, not
deleted.