IsoPrime User’s Guide
Version 1.01 IsoPrime100 User’s Guide Page 65 of 219
EDITING INFORMATION IN CELLS
The information in any cell in the sample list may be directly modified by single clicking on the
cell and then overwriting, or double clicking and then editing the text.
In the MS File, Inlet File, Process and Process Options columns, cells may be edited by double
clicking and selecting a new file name from the drop down box.
Users may cut or copy the information in cells and then paste the information into new cells, as
follows:
Highlight the cell(s) to be copied.
Either choose Edit and select Cut or Copy, as required, or right-click in the sample list
and select Cut or Copy from the drop down menu.
Highlight the cell(s) into which the new information is to be pasted.
Either choose Edit and select Paste, or right click in the sample list and select Paste
from the drop down menu. The paste operation may be repeated as often as necessary.
Caution: note that the paste area must be the same size as the cut and copy
area.
CLEARING SELECTED CELLS
The information in any cells in the sample list may be deleted as follows:
Highlight the cells to be cleared. Complete rows may be selected by pressing the
numbered cells on the left hand side of the sample list, and complete columns may be
selected by clicking the relevant column title cells.
Either choose Edit, Delete, or press the Delete keyboard button, or right-click and
choose Delete Contents from the drop down menu.
All the information in the sample list may be cleared by selecting Edit, Select All and
then pressing the Delete keyboard button.
To Next Page