Isoprime User’s Guide
Version 1.02 IsoPrime100 User’s Guide Page 64 of 219
FILL DOWN
The fill down operation facilitates the entry of sample information into the sample list. The
process duplicates the information in a selected cell into lower cells in the same column. Several
columns may be filled down at the same time. Any information previously present in the cells to
be filled is replaced by the new information. If the copied cell is empty, the cells being filled will
be empty, and any pre-existing information will be cleared.
To use the fill down operation:
Click on the sample cell or cells to be copied, and drag downwards to highlight
the region to be filled. At least two samples must be selected, but any number of
columns or rows may be filled.
Either press the
button or right-click in the sample list and choose Fill Down
from the drop down menu.
FILL SERIES
The fill series function is also used to speed up the entry of sample information into the sample
list. This process sequentially increments any numerical information in the selected column(s). If
there is more than one number in a cell then only the last
number is incremented. The command may only be used to format the File Name, Bottle and
Sample ID columns.
To use the fill series operation:
Click on the sample cell or cells to be copied, and drag downwards to highlight
the region to be filled. At least two samples must be selected, but any number of
columns or rows may be filled.
Press the button or right-click in the sample list and choose Fill Series from the
drop down menu.
When there is more than one number in the cell(s) being copied, only the last number is
sequentially incremented.
To Next Page