33
English/ Chapter 07
Region: Select the region where you are located.
Enable SSID Broadcast: If enabled, the router broadcasts its SSID in the
wireless network. Wireless clients can scan the SSID and access the
wireless network under the SSID.
Enable Wireless Isolation: If selected, wireless clients connected to the
network of the same SSID can access the Internet only, but cannot
communicate with each other.
Name (SSID): Set the name for the wireless network. The SSID can
contain up to 32 characters and can be letters, numerals, underlines, and
any combinations of them. The SSID is case-sensitive.
Mode: Select the wireless mode. Mixed 802.11b/g/n is recommended.
Channel: The channel for transmitting wireless signals. The default
channel is Auto. When you select Auto, ISY Wireless Range Extender
automatically selects the best channel from the available channels
according to actual situations.
Band Width: The bandwidth occupied for wireless signal transmission.
Max Transmission Rate: The maximum transmission rate of ISY Wireless
Range Extender.
Security Options: Set the security encryption of the wireless network,
to prevent unauthorized access and listening.
English
To Next Page
Loading...