ISY INW5000 - Using the WPS Button (Repeater Mode)

80
English/ Chapter 10
10.4.1.1 Using the WPS Button
WPS connection to the uplink AP
In the Repeater mode with WDS disabled, press the WPS button on the
side panel of ISY Wireless Range Extender in 3 seconds and release it.
And press the WPS button on the uplink AP. Then they can start WPS
session.
WPS connection to the downlink client device
In the Repeater mode with WDS disabled, press the WPS button on the
side panel of ISY Wireless Range Extender for 3-10 seconds and release
it. And press the WPS button on the client device. Then they can start
WPS session.
Note: The SSID, authentication and pre-shared key for ISY Wireless
Range Extender will automatically change to the same as those of its
uplink AP after ISY Wireless Range Extender succeeds in connecting to
the uplink AP through the WPS button mode.