35
English/ Chapter 07
Encryption Type: The type of the key to be set. Hexadecimal and ASCII
code are available
Hex: Valid characters for keys contain 0–9 and A–F.
ASCII: Valid characters for keys contain all characters of the key
board.
Encryption Strength: The encryption strength determines the length of
the key.
If Encryption Strength is set to 64 bits, set the key to 10 hexadeci-
mal digits or 5 ASCII characters.
If Encryption Strength is set to 128 bits, set the key to 26 hexadeci-
mal digits or 13 ASCII characters.
Key 1/2/3/4: Set the key based on the selected encryption type and
encryption strength.
To Next Page
Loading...