ISY INW5000 - WPS Setup (Client Mode)

To Next Page

To Previous Page

English/ Chapter 12

12.4.1 WPS Setup

WPS refers to Wi-Fi Protected Setup.

You can use WPS to establish wireless connection in a quick and secure

way if the uplink AP or terminal (for example, the network adapter) has

the WPS function. It is suggested to ﬁrst conﬁgure wireless encryption

for the uplink AP. If you change the wireless encryption mode after

having establishing wireless connection using WPS, you must use WPS

to establish wireless connection again. Note that if the wireless client

does not support WPS you must manually conﬁgure the wireless client

(such as SSID, security mode, and password) to make it have the same

SSID and wireless security settings as the router.

The following describes how to conﬁgure WPS for the Client mode.

Using the WPS Button

In the Client mode, ISY Wireless Range Extender can perform WPS

encrypted connection to either the uplink AP or the repeater.

Using the Web Page

You can perform WPS settings using the Web page for conﬁguration.

Choose Wireless Settings > WPS Setup to display the WPS Setup

page.

PBC mode

Step 1 Select Push Button and click Start PBC. WPS encrypted

connectionstarts.