Load Function
LIST List menu
Run Indicates to enter the List run mode, waiting for the trigger to
run the currently selected List file.
Open Select the List file to open.
USB Open the List file in the external USB flash disk.
Load Import the List file from the exter-
nal USB flash disk into the
instrument.
Not-Load Cancel the import operation.
Internal Open the List file stored inside the instrument.
Recall Inner
List File
Set the name of the recalled List
file.
Export Export the internal List file of the instrument to an external
USB flash drive.
File
Name
The name of the exported list file. The default suf-
fix is .csv, and the file name can only be a string
of numbers.
Edit Edit list program.
CC / CV
/ CW /
CR
Set the operation mode for list program: CC, CV,
CW or CR.
Step
Count
The total number of steps included in the List
program.
Step 1
Value
Parameter value for Step1. The current appears
when CC mode is selected; the voltage appears
when CV mode is selected. The resistance ap-
pears when CR mode is selected; the power ap-
pears when CW mode is selected.
Step 1
Slope
Slope value setting for Step1.
Step 1
Width
Dwell time setting for Step1. The range is from
0.001 to 86400 seconds.
Repeat Set the number of list file repetitions.
End
State
Set the running state after the list program is run-
ning over.
Copyright © Itech Electronic Co., Ltd.
157
To Next Page
Loading...
Need help?
General
