To Next Page

To Previous Page

Power Supply Function

7. Select the USB and press [Enter].

At this point, the system will automatically read all the List files in the root

directory of the USB flash drive. The interface is displayed as follows:

XXX.csv

Not-Load Load YY/ZZ

XXX indicates the name of the List file; YY indicates the serial number of

the current List file; ZZ indicates the total number of the List file.

8. Press the Up/Down key to select the file.

9. Press the Left/Right key to select Load, press [Enter] to complete the

import, and wait for the trigger to run this file.

10.Turn on the [On/Off].

11.Based on the selected trigger method, perform the trigger operation.

• Programming via SCPI instructions

For detailed instructions and parameter introduction, please refer to the in-

structions of "ARB Subsystem" in the Programming Guide.

• Realized by the software IT9000 on PC

For detailed function usage, please refer to IT9000–PV6000 User Manual.

4.6.2 Battery Charging/Discharging Test Function

The IT6000B series power system provides the battery charging/discharging

test function based on its unique bidirectional power supply properties. Suitable

for charging/discharging tests on all types of portable batteries.

ITech IT6000B Series User Manual

Questions and Answers: