ITech IT6000B Series - Page 18

Quick Reference
Keys Description
[Esc] Press this key to exit the current operation interface.
[0]-[9] Numeric keys
+/– Positive and negative signs
. Decimal point
Left / Right
navigation
keys
The left and right navigation keys are used to adjust the cur-
sor to the specified position or scrolls pages to view menu
items.
Up / Down
navigation
keys
The up and down navigation keys are used to scroll page up
and down to view menu items.
[Enter] Operation confirmation key
Composite key [Shift], combined with other keys to realize functions marked
above keys. The detailed functions are listed as follows.
The [Shift]+[XXX](YYY) combination key form identified in this document re-
fers to pressing [Shift] button first, then press the [XXX] button, please pay
attention to the sequence.
Keys Description
[Shift]+[On/Off]
(Trigger)
Generate a local trigger signal.
[Shift]+[V-set]
(Config)
Enter to Configuration menu.
The configuration parameters are different under Source
mode and Load mode
[Shift]+[I-set]
(Function)
Enter the Function menu.
The Function parameters are different under Source
mode and Load mode.
[Shift]+[P-set]
(System)
Enter the System menu.
[Shift]+[R-set]
(Protect)
Enter the Protect menu.
The Protect parameters are different under Source
mode and Load mode.
Copyright © Itech Electronic Co., Ltd.
6