ITech IT6400 Series User Manual

Quick Reference
Copyright © Itech Electronic Co., Ltd. 8
Function description of options:
Option
Function description
Source
Source function, used for setting voltage, current and internal
resistance of the power supply. The display is same as the
Home key.
Graph
Waveform display function, used for setting display wave
curve and corresponding current and voltage.
Battery
Battery function, used for battery charging/discharging and
characteristic simulation.
List
List, used for setting and editing output steps, output voltage
and corresponding time.
Math
Used for selecting the filtering type of power supply output,
storage depth and type synthesis.
Config
Power supply configuration menu, comprising Speed, Range,
OVP, Limit, etc.
System
System menu, comprising Sys Log, Sys Conf, Sys Info, Sys
Comm, Sys Cal, etc.
1.6.1 System Menu Function
Select “Menu > System” to enter the System Menu interface. The menu is
described as follows:
System
System menu configuration
System
Calibration
System Cal
Calibration unit (only
used in factory)
Voltage Cal
Voltage Calibration
Current Cal
Current Calibration
RES Cal
Resistance Calibration
DVM Cal
DVM Calibration
Channel(1/2)
Channel selection: Channel 1,
Channel 2. (Only IT6402/IT6412/
IT6412S contain this menu.)

ITech IT6400 Series Specifications

General

Brand	ITech
Model	IT6400 Series
Category	Power Supply
Language	English