ITech IT6400 Series - Page 67

Battery Simulation Function
Copyright © Itech Electronic Co., Ltd. 59
No.
Description
Function Description
1
Manual edit area
This area mainly displays editable parameters,
as follows:
⚫ Group: Characteristic data group (0 - 19).
⚫ Capacity: Configure battery capacity.
⚫ Volt: Configure voltage for single step.
⚫ Res: Configure resistance for single step.
2
Status bar
-
3
System time
-
4
Soft key button
-
5
Display area of
characteristic
data
This area mainly displays the edited battery
characteristic data group. Use to roll
and view this list.
Introduction of soft keys on the Manual interface
⚫ IT6411/IT6431/IT6432/IT6433/IT6411S/IT6432S
⚫ IT6402/IT6412/IT6412S