ITech IT8500plus Series - [Source:]Voltage[:Level][:Immediate][:Amplitude] <Nrf; [Source:]Voltage[:Level][:Immediate][:Amplitude]

Input Settings
Copyright © ITECH Electronic Co., Ltd. 34
Parameters
None
Unit
A
*RST Value
MINimum
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]
<NRf+>
This command is used to set the voltage setting in CV mode.
Command Syntax
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude] <NRf+>
Parameters
MIN~MAX|MINimum|MAXimum
Unit
V
*RST Value
MAXimum
Examples
VOLT 5
Query Syntax
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]?
Returned Parameters
<NR2>
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]?
This command is used to query the voltage setting in CV mode.
Command Syntax
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]?
Parameters
None
Unit
V