ITech IT8500plus Series Programming Guide

Input Settings
Copyright © ITECH Electronic Co., Ltd. 43
*RST Value
MAX
[SOURce:]DYNamic:MODE <mode>
This command is used to set the working mode in dynamic mode.
Command Syntax
[SOURce:]DYNamic:MODE <mode>
Parameters
CONTinuous|PULSe|TOGGLe
*RST Value
CONTinuous
Examples
DYN:MODE PULS
Query Syntax
[SOURce:]DYNamic:MODE?
Returned Parameters
<CRD>
[SOURce:]DYNamic:MODE?
This command is used to query the working mode in dynamic mode.
Command Syntax
[SOURce:]DYNamic:MODE?
Parameters
None
*RST Value
CONTinuous

ITech IT8500plus Series Specifications

General

Brand	ITech
Model	IT8500plus Series
Category	Test Equipment
Language	English