ITech IT8500plus Series - Chapter 6: Communication Interfaces; Communication Module Options

Voltage Rise/Fall Time Test
Copyright © ITECH Electronic Co., Ltd. 57
Unit
V
Returned Parameters
MAXimum
Query Syntax
TIME:VOLTage:HIGH?
TIME:VOLTage:HIGH?
This command is used to query the starting drop voltage value.
Command Syntax
TIME:VOLTage:HIGH?
Parameters
None
Returned Parameters
<NRf>
TIME:VOLTage:UP?
This command is used to read the voltage rise time.
Command Syntax
TIME:VOLTage:UP?
Parameters
None
Returned Parameters
<NRf>
TIME:VOLTage:DOWN?
This command is used to read the voltage fall time.
Command Syntax
TIME:VOLTage:DOWN?
Parameters
None
Returned Parameters
<NRf>