星火全自动缝纫控制系统使用说明书
Operation Instruction for Xing Huo Automatic Sewing Control System
multiple selected files and rename it.
Delete the selected file: deletes the currently selected file or the last
file of multiple selected files.
Batches delete selected files: deletes the currently selected multiple
files.
Move files: moves the currently selected file or the last file of
multiple selected files to the specified position. For example, select "002:TEST2.FLW", click
on , in the pop-up dialog box, amend the current sequence number "2" to be "1", click
on "Confirm". It will change to be "001:TEST2.FLW".
Output file: copies selected single or multiple files from memory files
to the root directory of U Disk. If there is any file of the same name in U Disk, it will be
replaced.
Memory, U Disk switch: press the key once switch between
memory and U Disk.
3.2 U Disk File Management
After inserting U Disk, in the memory management interface, press key to
switch to the U Disk file management interface, as shown in figure:
To Next Page
Loading...