星火全自动缝纫控制系统使用说明书
Operation Instruction for Xing Huo Automatic Sewing Control System
Chapter VII Auxiliary Operation
Auxiliary operation is mainly composed by Combine File, Test for External Components
of Equipment, User Management, System Update, etc.
7.1 Auxiliary Operation Interface
In the main menu interface, press the button to enter auxiliary operation
interface, as shown in figure:
Functions of keys are introduced as follows:
Combine File: combines multiple (up to 8) files into one file for processing.
Exp. Param: exports all parameters of the system to save in U disk.
Output Test: tests whether the output control is normal.
Locking Setting: sets management password, use time limit, export password, etc.
Date Setting: sets the system time.
Input Test: tests whether the input control is normal.
Version Info.: displays the version information of system.
System Update: used to update the firmware version of system.
Spindle Test: used to test the spindle operation. Part of the versions does not support it.
To Next Page
Loading...