星火全自动缝纫控制系统使用说明书
Operation Instruction for Xing Huo Automatic Sewing Control System
figure:
Choose forward and backward reinforcing or closed reinforcing way according to the
need.
4.11.1 Forward and Backward Reinforcing
Forward and backward reinforcing is only applicable to the unclosed graph. Forward and
backward reinforcing is the reverse stitching of the head and the tail.
In reinforcing setting interface, press the key to enter the forward and backward
reinforcing setting interface, key background will become yellow. As shown in figure:
There are four kinds of ways for beginning reinforcing, , , , : means
to carry out reverse stitching to the beginning for 1, 2, 3, 4 times respectively before starting
normal sewing, as shown on the icon.
To Next Page
Loading...