星火全自动缝纫控制系统使用说明书
Operation Instruction for Xing Huo Automatic Sewing Control System
operation interface, as shown in figure:
Press the key to confirm deleting selected needle point. It will return to the select
stitch interface automatically, and you can continue to edit or click button to save the
changes and return to the edit file main interface.
5.4 Forward and Backward Reinforcing
In the edit file main interface, press the button to enter select stitch interface, as
shown in figure:
Press the Single Step or Continue key to move the cursor forward and backward to the
needed position. Press the key to enter the edit operation interface, as shown in figure:
To Next Page
Loading...