星火全自动缝纫控制系统使用说明书
Operation Instruction for Xing Huo Automatic Sewing Control System
"Reverse stitching backwards from the beginning” is beginning reinforcing, "Reverse
stitching forward from the end" is end reinforcing, which can be set at the same time, or
either.
Set number of times and number of stitches to reverse stitching according to the need.
After the setting is completed, press the key to save the current settings.
Return to the select stitch interface automatically, reinforcing part will become thick. You
can continue to edit or click button to save the changes and return to the edit file main
interface.
5.5 Closed Reinforcing
In the edit file main interface, press the button to enter select stitch interface, as
shown in figure:
To Next Page
Loading...